Lenovo ThinkServer TS130 - Replacing the Primary Hard Disk Drive

6.Reinstallthefrontbezel.See“Removingandreinstallingthefrontbezel”onpage20.
7.ConnectoneendofthesignalcabletotheopticaldriveandtheotherendtoanavailableSATA
connectoronthesystemboard.See“Locatingpartsonthesystemboard”onpage14.Then,locatean
availableve-wirepowerconnectorandconnectittotheSATAdrive.
Figure19.ConnectingaSATAopticaldrive
Whattodonext:
•Toworkwithanotherpieceofhardware,gototheappropriatesection.
•Tocompletetheinstallationorreplacement,goto“Completingthepartsreplacement”onpage50.
Replacingtheprimaryharddiskdrive
Attention:Donotopenyourserverorattemptanyrepairbeforereadingandunderstanding“Safetyinformation”
onpageiii
and“Guidelines”onpage17.
Thissectionprovidesinstructionsonhowtoreplacetheprimaryharddiskdrive.
Toreplacetheprimaryharddiskdrive,dothefollowing:
1.Removeallmediafromthedrivesandturnoffallattacheddevicesandtheserver.Then,disconnectall
powercordsfromelectricaloutletsanddisconnectallcablesthatareconnectedtotheserver.
2.Removetheservercover.See“Removingtheservercover”onpage19.
3.Locatetheprimaryharddiskdrive.See“Locatingpartsonthesystemboard”onpage14.
4.Disconnectthesignalcableandthepowercablefromtherearoftheharddiskdrive.
30ThinkServerTS130UserGuide