Lenovo ThinkServer TS150 - Installing the SUSE Linux Enterprise Server 12.1 Operating System

12.Thesetupprocesscontinuesaftertheserverrestarts.Setyourrootuserpassword.ThenclickNext.
WhentheYaST2windowisdisplayed,clickY es.
Note:Thepasswordisoptionalandmustcontainatleastsixcharactersandconsistofuppercase
letters,lowercaseletters,andnumbers.
13.SetyourhostnameanddomainnameintheHostnameandDomainNamewindow.ThenclickNext.
14.ConfigureyournetworkintheNetworkConfigurationwindow.ThenclickNext.
Note:IftheTestInternetConnectionwindowisdisplayed,configurethesettingsyouneed.Then
clickNext.
15.IntheNetworkServicesConfigurationwindow,clickNext.
16.IntheUserAuthenticationMethodwindow,configurethesettingsyouneed.Then,clickNext.
17.IntheNewLocalUserwindow,configurethesettingsyouneed.Then,clickNext➙Yes.
18.IntheReleaseNoteswindow,clickNext.
19.IntheHardwareConfigurationwindow,clickNext.
20.IntheInstallationCompletedwindow,clickFinish.
Note:IftheYaST2windowisdisplayed,clickContinueorY es.
21.Followtheinstructionsonthescreentologintotheoperatingsystem.
InstallingtheSUSELinuxEnterpriseServer12.1operatingsystem
ThistopicprovidesinstructionsonhowtoinstalltheSUSELinuxEnterpriseServer12.1(x64)operating
system.
ToinstalltheSUSELinuxEnterpriseServer12.1(x64)operatingsystem,dothefollowing:
1.Inserttheoperatingsysteminstallationdiscintotheopticaldrivethatyouhavesetasthefirststartup
device,andstarttheserverfromtheopticaldrive.
2.IntheLanguage,KeyboardandLicenseAgreementwindow,selectyourlanguageandkeyboardlayout
andthenselectIAgreetotheLicenseTerms.ClickNext.
3.IntheRegistrationwindow,configuretheinformationaspromptedandclickNext.Thefollowingsteps
arebasedonthescenariothatSkipRegistrationisselectedinthisstep.
4.IntheAddOnProductwindow,selectadd-onstobeinstalledandclickNext.Thefollowingstepsare
basedonthescenariothatdefaultoptionsareselectedinthisstep.
5.IntheSuggestedPartitioningwindow,usethesuggestedpartitioningmethodandclickNext.Ifyou
wanttocreateadrivepartition,dooneofthefollowing:
•Manuallycreatearootpartition(/)
a.ClickCreatePartitionSetupandselectCustomPartitioning(forexperts).ClickNext.
b.IntheExpertPartitionerwindow,selectHardDisksfromSystemview.Thenselectthedrive(for
example,sda)forinstallingtheoperatingsystemandclickAdd.
c.IntheNewPartitionsSizewindow,selectCustomSize.
d.Typetheamountofspace(forexample,80GB)intheSizefieldandthenclickNext.
e.SelectOperatingSystemfromRole.
f.IntheFormattingOptionsarea,selectBtrFSfromtheFilesystemdrop-downlistbox.
g.IntheMountpartitionarea,selecttheforwardslash(/)fromtheMountPointdrop-downlistbox.
h.ClickFinish.
•Manuallycreateabootpartition(/boot/efi)
14ThinkServerTS150OperatingSystemInstallationGuide