Lenz Digital plus SET-01/4 User Manual

Information SET-01 53
DIGITAL plus
"DCC" stands for deceleration
delay (CV4)
"MAX" stands for maximum speed
(CV5). Please note that not all
decoders use CV5.
Page until you see the setting you
want displayed.
Use ‘Enter’ to select the desired
setting.
Now enter the value you want.
'Enter' starts the programming,
and once it is done, you are
returned to selecting the setting.
14.2.5 Setting and erasing bits (switches) using PoM — step
by step procedure
Many CVs don’t use numeric values, but individual bits (switches)
for particular settings. It is then much easier to get the needed
setting by setting and erasing the individual bits (switches), instead
of calculating the corresponding numeric value and then program it
into the CV (which of course also works).
Press On the display you see Explanation
Call up the locomotive whose
settings you want to change
using PoM
Display shows the most
recently selected menu
Page with the '-' key until the
display shows "CV"
Enter the number of the CV you
want to change. In this example
we will select CV29

Lenz Digital plus SET-01/4 Specifications

General

Brand	Lenz
Model	Digital plus SET-01/4
Category	Control Unit
Language	English