Appendix
10-1
BA9300POS EN 2.3
10 Appendix
10.1 Accessories
For the controllers, Lenze offers the following accessories:
• Mains filter
• Fuses
• Fuse holders
• System cable for resolver
• System cable for digital frequency coupling
APCcanbe connected to thecontroller viathe field bus module LECOM A/B (RS232,RS485 orfibre
optics). TheGlobal-Drive-Control (GDC)PC program allows asimple programming of thecontroller.
Global Drive Control (GDC) PC program
The program runs under Windows and is supplied with drivers for LECOM A/B (RS232, RS485 or
optical fibre).
Further functions of the PC program:
• Process signal visualization
• Diagnostics and troubleshooting
• Commissioning support
• Oscilloscope function
10.2 Code table
How to read the code table:
Row Abbreviation Meaning
Code C0039
1
2
...
14
15
Code C0039
Subcode 1 of code C0039
Subcode 2 of code C0039
...
Subcode 14 of code C0039
Subcode 15 of code C0039
[C0005] Parameter value of the code can only be modified when the controller is inhibited
LCD Keypad LCD
• Display of the short text, e.g.
2#4 .1#&
Lenze Factory setting of the code
* The row ”Important” contains further information
g
Codes only display values. They cannot be configured.
Choice 1{1%}99Minimum value {smallest step/unit} maximum value
Important - Additional, important explanation of the code
Printed in bold: Code name in GDC
^
10-1 Reference to a page indicating further information on a code.
To Next Page
Loading...
