Lenze E82MV152_4B

Table of keywords
abc
15−5
L EDB82MV752 EN 5.2
LECOM−B, operating status, 6−13
LED display, 8−1
LED’s, 8−1
Legal regulations, 1−2
Level inversion
Digital inputs, 7−72 , 14−37
digital inputs, 14−21
Digital outputs, 14−41
digital outputs, 7−76
Liability, 1−2
Limit value, 7−21
Setting, 7−21
M
Main and additional setpoint, Application I/O, 14−26
Mains conditions, 4−4
Mains disconnection, Drive performance, 7−18
Mains failure, Drive performance, 7−18
Mains switching, cyclic, 5−6 , 5−10
Mains types, 4−4
Mains voltage compensation, 7−5
Maloperation of the drive, 8−3
Manual / remote operation, 7−47
Manufacturer, 1−2
Max. limit process controller output, 14−27
Maximum motor cable length, 4−6
Mechanical design, 4−1
Mechanical installation, 4−1
Menu
"ALL", 6−4
"User", 6−4
structure in the keypad, 6−4
Menu structure, Keypad E82ZBC, 5−2
Min. limit process controller output, 14−27
Minimum frequency limitation, Acceleration time, 7−21 ,
14−27
Monitoring functions
external faults, 7−85
Motor temperature, 7−82
motec, Description, 1−1
motor
Phase failure, 14−50
Thermal monitoring
Sensorless, 7−82
With PTC resistor, 7−84
Motor cable length, maximum permissible, 4−6
Motor data detection, 7−48
Motor monitoring, 7−82
Motor parameter identification, , 7−48
Motor potentiometer, 7−41
Motor protection, 4−3
Mounting, function module, 4−8
Mounting positions, 3−1
Multi−motor drive, 13−13
N
Noise emission, 3−2
Noise immunity, 3−2
Noise optimised operation, 7−14
O
Offset
Analog input 1, 7−34 , 14−16
analog inputs, 7−34 , 14−38
Analog output 1, 7−61 , 14−19
analog outputs − application I/O, 7−62 , 14−47
Inverse characteristic process controller, 14−27
Operating behaviour
Optimise, 7−2
Optimising, 7−13
Operating conditions, 3−1
Operating mode, 7−4 , 7−8 , 7−10 , 14−15
for standard applications, 7−2
Select, 7−2
V/f characteristic control, 7−4
Vector control, 7−8
Operating status
Display, 8−1
LECOM−B, 6−13
Operating threshold, auto DCB, 7−27 , 7−30 , 14−16
Operating time, 14−25
Operation, with earth−leakage circuit breaker, 4−5
operation
noise optimised, 7−14
on public systems, 4−4
Operation of mid−frequency motors, 13−9
Oscillation damping, 7−16
Reduction of speed oscillations, 7−16
Output signal − analog outputs, range, 7−62 , 14−48
Output signals
Analog, Configuration, 7−59
digital, Configuration, 7−73
Outputs
Analog, 7−59