Function library
Free connection of digital signals, message output
7−68
L
EDB82MV752 EN 5.2
7.11 Free interconnection of digital signals
7.11.1 Free configuration of digital input signals
Description
Internal digital signals can be freely assigned to external digital signal sources. It is thus
possible to achieve a freely configured control of the controller
– Digital inputs X3/E1 ... X3/E6
– Digital process data input words
A signal source can be assigned to several targets. Please ensure reasonable assignments.
Otherwise it is possible to activate functions which cannot be operated together (e.g. a digital
signal linked with quick stop and DC braking at the same time).
) Note!
Use C0007 to configure some internal digital signals with the digital inputs X3/E1 ...
X3/E4 block by block. The corresponding subcodes of C0410 will be adapted
automatically.
To Next Page
Loading...