Parameter data transfer
Initialise PCP communication
Available PCP services
8
l
50
EDS82ZAFIC EN 2.0
Initiate
The "Initiate" PCP service establishes a logic connection between the master and the
function/communication module. The controller provides the following parameters:
Designation Value Meaning
Profile number 0x21 DRIVECOM profile of version 1
Password 0 Password function of INTERBUS is not supported.
Access groups 0 No access groups exist.
Access protection supported TRUE Access protection is supported.
OD version 0 Version of the object directory
Abort
The "Abort" PCP service aborts a logic connection between the master and the
function/communication module.
To Next Page
Loading...