Lenze E82ZAFVC010 - Page 52

Codes8
l
52
EDS82ZAFVCxxx EN 4.0
C1566:
Automatic trip reset communication error
Code Subcode
Possible settings
Data type
Lenze Selection
C1566 − 0 0 / 1 FIX32
Selection Meaning
0 No trip reset
1 One−time trip reset of communication monitoring to the basic device
The recommended switch−on sequence is as follows:
1. Switch on DeviceNet
2. Switch on the basic device
If the order is reversed, a communication error is indicated.
With code C1566 = 1, this message is always automatically reset once after switching on
the DeviceNet supply voltage.
) Note!
If the software is compatible with theE82ZAFD function module (DIP switch
S10), this function is not active.