Lenze E82ZAFVC010 - 9 Appendix; Data Transfer

Appendix
Data transfer
9
l
53
EDS82ZAFVCxxx EN 4.0
9 Appendix
9.1 Data transfer
) Note!
When using the DeviceNet communication profile, the corresponding
specified terminology must be considered. Note that translation into German
is not always permissible.
In these instructions, the following terms are used with the same meaning:
ƒ I/O data «Process data
– Input data is process data to the scanner
– Output data is process data from the scanner
ƒ Explicit Messages «Parameter data
ƒ Scanner « DeviceNet master