Lenze Global Drive 9300 Servo PLC Series - Page 76

Appendix
7-1
L MA9300PLC EN 1.4
7 Appendix
7.1 Table of keywords
A
Accessory kit, 1-2
Aggressive gases, 4-1
Appendix, 7-1
Application as directed, 1-3
Application conditions, 3-2
Assembly, 4-1
with fixing brackets or rails, 4-2
Automation interface, 4-27
B
Brake unit, 4-17
Bus connection, 4-26
C
Cable cross-sections, 3-7, 4-14
Control cables, 4-20
Mains connection, 4-13
Motor connection, 4-17
Cable specification, 4-12
CANopen, 4-26
Commissioning, 5-1
Initial switch-on, 5-4
Connection
Brake unit, 4-17
Connection diagram, 4-22
Control cables, 4-20
Mains- , 4-13
Motor, 4-15
Connection diagrams, 4-22
Connections, Power, 4-13
Control cables, 4-20
Control connection, 4-20
Control terminals, 4-20
max. permissible cross-sections, for motor connection, 4-20
Overview, 4-20
Protection against inverse polarity, 4-20
Terminal assignment, 4-20
Controller, 1-2
Application as directed, 1-3
Cold plate technology, 4-6
Labelling, 1-3
Cooling air, 4-1
Current operated protections, 4-9
D
DDS, 1-2
Definitions, 1-2
Dimensions, 3-8
Standard units, 4-2
Drive system, 1-2
Show/Hide Bookmarks