Lenze I51AE175F - Application as Directed; Foreseeable Misuse

Applicaon as directed
•
The product serves as a component for the control of three-phase AC motors and servo motors.
•
The product must only be actuated with motors that are suitable for the operaon with inverters.
•
The product is not a household appliance, but is only designed as electrical equipment for commercial or
professional use in terms of EN 61000−3−2.
•
The product is exclusively suitable for installaon in control cabinets or similarly closed operang areas.
•
The product must only be operated under the operang condions prescribed in this documentaon.
•
The product meets the protecon requirements of 2014/35/EU: Low-Voltage Direcve.
•
The product is not a machine in terms of 2006/42/EC: Machinery Direcve. With the excepon of all
funconal safety funcons.
•
Commissioning or starng the operaon as directed of a machine with the product is not permied unl
it has been ensured that the machine meets the regulaons of the EC Direcve 2006/42/EC: Machinery
Direcve; observe EN 60204−1.
•
Commissioning or starng operaon as directed is only permissible if the EMC Direcve 2014/30/EU is
complied with.
•
As the product may cause EMC interferences in residenal areas, the operator is responsible for taking
interference suppression measures.
Foreseeable misuse
Inverters are not to be operated with DC motors.
Safety instrucons
Foreseeable misuse
9