EDS94AYCEN EN 9.0 - 09/2012 L 11
E94AYCEN communication manual (Ethernet)
Safety instructions
General safety instructions and application notes
2 Safety instructions
2.1 General safety instructions and application notes
Lenze drive and automation components ...
– must only be used as directed.
Application as directed
( 13)
– must never be commissioned if they display signs of damage.
– must never be technically modified.
– must never be commissioned if they are not fully mounted.
– must never be operated without required covers.
– can have live, moving or rotating parts during and after operation, depending on
their degree of protection. Surfaces can be hot.
The following applies to Lenze drive components ...
– Only use permissible accessories.
– Only use original manufacturer spare parts.
Observe all the specifications contained in the enclosed and related documentation.
– This is the precondition for safe and trouble-free operation and for achieving the
product features specified.
Product features
( 14)
– The procedural notes and circuit details described in this document are only
proposals. It is up to the user to check whether they can be adapted to the particular
applications. Lenze does not take any responsibility for the suitability of the
procedures and circuit proposals described.
Note!
It is absolutely vital that the stated safety measures are implemented in order to
prevent serious injury to persons and damage to material assets.
Always keep this documentation to hand in the vicinity of the product during
operation.
Danger!
Disregarding the following basic safety measures may lead to severe personal
injury and damage to material assets.
To Next Page
Loading...
Need help?
General
