Lenze L-force 9400 Series

EDS94AYCEN EN 9.0 - 09/2012 L 13
E94AYCEN communication manual (Ethernet)
Product description
Application as directed
3 Product description
3.1 Application as directed
The Ethernet communication module ...
 is an accessory module that can be used in conjunction with the following standard
devices:
 is a device intended for use in industrial power systems.
 should only be used under the operating conditions prescribed in this documentation.
 can only be used in Ethernet networks.
Any other use shall be deemed inappropriate!
3.2 Identification
The type designation and hardware and software version of the communication module
are specified on the nameplate:
[3-1] Identification data
Product series Type designation From hardware
version
From software
version
Servo Drives 9400 HighLine E94AxHExxxx VB 01.50
Servo Drives 9400 PLC E94AxPExxxx VA 01.00
Regenerative power supply module E94ARNxxxx VA 01.00
E94YCDN005
1 Type designation (type)
E94 Product series
AVersion
Y Module identification: Extension module
C Module type: Communication module
EN Ethernet
2 Hardware version (HW)
3 Software version (SW)