EDS94AYCEN EN 9.0 - 09/2012 L 5
E94AYCEN communication manual (Ethernet)
About this documentation
1 About this documentation
Contents
The descriptions in this documentation only refer to the E94AYCEN communication
module (Ethernet).
The features and functions of the Ethernet communication module are described in detail.
Examples illustrate typical applications.
This documentation furthermore contains:
Safety instructions that must be observed
The basic technical data of the communication module
Information on versions of the Lenze standard devices to be used
Notes on troubleshooting and fault elimination
The theoretical context is only explained as far as it is required for understanding the
function of the communication module.
This documentation does not describe the software of another manufacturer. No
guarantee can be given for corresponding information in this documentation. Information
on the use of the software can be found in the documents for the host system (PLC,
scanner).
All brand names mentioned in this documentation are trademarks of their corresponding
owners.
Screenshots/application examples
All screenshots in this documentation are application examples. Depending on the
firmware version of the field devices and the software version of the installed engineering
tools (»Engineer«, »Network Analyzer«), the screenshots in this documentation may differ
from the screen representation.
Note!
This documentation supplements the mounting instructions supplied with the
communication module and the Servo Drives 9400 hardware manual.
The mounting instructions contain safety instructions that must be observed!
To Next Page
Loading...
Need help?
General
