EDS94AYCEN EN 9.0 - 09/2012 L 57
E94AYCEN communication manual (Ethernet)
Parameter reference
Parameters of the communication module for slot MXI1
C13002
C13003
Parameter | Name:
C13002 | Ethernet gateway address
Data type: UNSIGNED_8
Index: 11573
d
= 2D35
h
The gateway address is required if the Servo Drive 9400 is not located in the same subnetwork as the PC.
• The gateway address consists of four numbers from 0 to 255 which can be set in the four subcodes.
Gateway address
( 32)
Setting range (min. value | unit | max. value)
0 255
Subcodes Lenze setting Info
C13002/1 127 Gateway address
• Sequence: "[1].[2].[3].[4]"
• Lenze setting: "127.0.0.1"
C13002/2 0
C13002/3 0
C13002/4 1
; Read access ; Write access CINH PLC STOP No transfer
Parameter | Name:
C13003 | Ethernet: MAC-ID
Data type: UNSIGNED_8
Index: 11572
d
= 2D34
h
The MAC-ID is a globally unique identifier of an Ethernet-capable device. The MAC-ID is assigned by the
manufacturer and permanently burnt into the device (Lenze communication module).
• The MAC-ID consists of six numbers from 0 to 255 which are displayed in the six subcodes.
MAC-ID
( 32)
Display range (min. value | unit | max. value)
0 255
Subcodes Info
C13003/1 MAC-ID
• Sequence: "[1]-[2]-[3]-[4]-[5]-[6]"
C13003/2
C13003/3
C13003/4
C13003/5
C13003/6
; Read access Write access CINH PLC STOP No transfer
To Next Page
Loading...
