EasyManua.ls Logo

Lenze L-force 9400 Series

Lenze L-force 9400 Series
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EDS94AYCEN EN 9.0 - 09/2012 L 59
E94AYCEN communication manual (Ethernet)
Parameter reference
Parameters of the communication module for slot MXI1
C13007
C13008
Parameter | Name:
C13007 | Resolved Subnetmask
Data type: UNSIGNED_8
Index: 11568
d
= 2D30
h
The subnet mask indicates which part of the IP address is evaluated as Net-ID and which part as Host-ID.
The subnet mask consists of four numbers from 0 to 255 which can be set in the four subcodes.
Subnet mask
( 31)
Display range (min. value | unit | max. value)
0 255
Subcodes Info
C13007/1 Subnet mask
Sequence: "[1].[2].[3].[4]"
C13007/2
C13007/3
C13007/4
; Read access Write access CINH PLC STOP No transfer
Parameter | Name:
C13008 | Resolved Gateway-Address
Data type: UNSIGNED_8
Index: 11567
d
= 2D2F
h
The gateway address is required if the Servo Drive 9400 is not located in the same subnetwork as the PC.
The gateway address consists of four numbers from 0 to 255 which can be set in the four subcodes.
Gateway address
( 32)
Display range (min. value | unit | max. value)
0 255
Subcodes Info
C13008/1 Gateway address
Sequence: "[1].[2].[3].[4]"
C13008/2
C13008/3
C13008/4
; Read access Write access CINH PLC STOP No transfer

Table of Contents

Other manuals for Lenze L-force 9400 Series

Related product manuals