Leroy-Somer DIGIDRIVE SE2.5T User Manual

Installation and commissioning
DIGIDRIVE
Variable speed drive
Réf. 3218 GB - 4.33 / d - 02.02
LEROY-SOMER
75
180 F.bus
Disconnection of the
fieldbus during
operation
•Serial link
182 C.Err
The content of the
copy key memory is
inconsistent
--
183 C.dat
The copy key memory
is empty
--
185 C.Acc
Access to storage of
parameters in the copy
key has not been
enabled
--
186 C.rtg
The drive rating is
different to that
stored in the copy key
• The parameters
connected with the
drive rating have not
been transferred, and
must be set after clearing
the fault using the
key
188 O.Ld2
Overload on
the +24V power supply
•RJ45 connector
•Terminals 7 and 14
• Check that the power
supply is not drawing
more than 110mA
• Check that there is no
short-circuit.
189 O.cL
Overload on the A2
current analogue input
•Current reference level • Check that the current
reference is < 25mA
No.
Display
mnemonic
Reason for fault Points to check Solution

Leroy-Somer DIGIDRIVE SE2.5T Specifications

General

Brand	Leroy-Somer
Model	DIGIDRIVE SE2.5T
Category	Inverter
Language	English