Installation and commissioning
DIGIDRIVE
Variable speed drive
Réf. 3218 GB - 4.33 / d - 02.02
LEROY-SOMER
93
7.10 - Fieldbus options
"Fieldbus" options can be integrated in the entire DIGIDRIVE range.
Data is exchanged by means of the drive serial link (RJ45 socket).
7.11 - Additional functions
As well as access to the parameters described in this manual, the UNIPAD console (section
7.6.2) and the DIGISOFT software (section 7.6.3) can be used to extend operation of the
DIGIDRIVE by offering additional functions such as:
- special ramps on preset speeds
- torque regulation
- timers and energy meters
- alarms on timer
- reassignment of inputs (logic and analogue outputs)
- AND, OR, comparator and time delay functions
- PID controller
- motor-driven potentiometer
- control of 2 motors with different characteristics, etc.
See the manual entitled "Extended Functions" ref. 3299.
Fieldbus type DIGIDRIVE option
Profibus DP DIGICOM PB
Interbus S DIGICOM IB
Devicenet DIGICOM DN
Can Open DIGICOM CN
M
PL1
PL3
PL4
L1 L2 PE U V W
PL2
15
1 2 3 4 5 6 7 8 9 1011121314
16
DIGIDRIVE
DIGICOM
Fieldbus
option
To Next Page
Loading...
Need help?
General
