Digital Pressure Indicator DPI - Bedienungsanleitung
26 Friedrich Leutert GmbH & Co. KG
5.2.1 Pressure Plot
The curve progression shown in the [Pressure Plot] display mode shows the
cylinder pressure [bar] for each cylinder measured at the indicator valve
depending on the crankshaft angle [° CA].
Select from the right window area the cylinders to be displayed:
– Checkboxes for individual cylinders (multiple selection possible)
– [All On] shows all cylinders
– [All Off] hides all cylinders
The button [Show Cyl. Overlay] also serves to select cylinders in a separate
window. This function also offers the possibility to select a new dataset
and to display an additional measurement (overlay).
To Next Page
Loading...
