Digital Pressure Indicator DPI - Bedienungsanleitung
22 Friedrich Leutert GmbH & Co. KG
5 Display measurement results
5.1
Transferring data from the handheld device to the PC
For analysis and interpretation of the recorded cylinder pressure curve
use the DPI software belonging to the system. For this purpose it is
necessary to transfer the saved measurement data from the DPI handheld
device to the PC.
1) Connect the handheld device to the PC using the USB cable.
2) Start the DPI software.
3) In the menu [Handheld] open the command [Import measurement
data]. A window with the measurements saved in the handheld de-
vice appears.
To Next Page
Loading...
