Leuze electronic General information
Leuze electronic BPS 8 3
TNT 35/7-24V
1 General information
1.1 Explanation of symbols
The symbols used in this operating manual are explained below.
Attention!
This symbol appears before text passages which must absolutely be observed. Failure to
heed this information can lead to injuries to personnel or damage to the equipment.
Attention Laser!
This symbol warns of possible danger through hazardous laser radiation.
Notice!
This symbol indicates text passages containing important information.
1.2 Declaration of conformity
The barcode positioning system BPS 8 and the optional connector unit MA 8 have been
developed and manufactured under observation of the applicable European standards and
directives.
Notice!
A copy of all declarations of conformity available for the product can be found in the appen-
dix of this manual (see chapter 13.1 "EU Declaration of Conformity" on page 90).
The manufacturer of the product, Leuze electronic GmbH + Co. KG in D-73277 Owen/Teck,
possesses a certified quality assurance system in accordance with ISO 9001.
ISO
9001
To Next Page
