Leuze BPS 8 Technical Description

Leuze electronic Maintenance
Leuze electronic BPS 8 89
TNT 35/7-24V
12 Maintenance
12.1 General Maintenance Information
Usually, the BPS 8 does not require any maintenance by the operator.
In the event of dust build-up, clean the optical window with a soft cloth; use a cleaning agent
(commercially available glass cleaner) if necessary.
Also check the barcode tape for possible soiling.
Attention!
Do not use solvents and cleaning agents containing acetone. Use of improper cleaning
agents can damage the optical window.
12.2 Repairs, servicing
Repairs to the device must only be carried out by the manufacturer.
!
Contact your Leuze distributor or service organisation should repairs be required.
The addresses can be found on the inside of the cover and on the back.
Notice!
When sending devices to Leuze electronic for repair, please provide an accurate description
of the error.
12.3 Disassembling, packing, disposing
Repacking
For later re-use, the device is to be packed so that it is protected.
Notice!
Electrical scrap is a special waste product! Observe the locally applicable regulations re-
garding disposal of the product.

Leuze BPS 8 Specifications

General

Brand	Leuze
Model	BPS 8
Category	Valve Positioners
Language	English