Leuze electronic Safety notices
Leuze electronic BPS 8 5
TNT 35/7-24V
2 Safety notices
2.1 General safety notices
Documentation
All entries in this technical description must be heeded, in particular those in section "Safety
notices". Keep this technical description in a safe place. It should be accessible at all times.
Safety regulations
Observe the locally applicable legal regulations and the rules of the employer's liability insur-
ance association.
Repair
Repairs must only be carried out by the manufacturer or an authorised representative.
2.2 Safety standards
The BPS 8 series was developed, manufactured and tested in accordance with the appli-
cable safety standards. It corresponds to the state of the art.
2.3 Intended use
The barcode positioning system of the BPS 8 device series is an optical measuring system
which uses visible red laser light to determine the position of the BPS relative to a perma-
nently mounted barcode tape.
The optional connector and interface unit MA 8-01 is intended for the easy connection of
barcode positioning systems of type BPS 8.
In particular, unauthorised uses include:
• rooms with explosive atmospheres
• operation for medical purposes
Attention!
The protection of personnel and the device is guaranteed only if the device is operated in a
manner corresponding to its intended use.
Areas of application
The barcode positioning system BPS 8 has been developed for positioning tasks in the
following areas of application:
• Crane bridges and trolleys
• Side-tracking skates
• Telpher lines
• Lifts
To Next Page
Loading...
