23
4.3.2.2 HTTPS
The HTTPS setting can be found under this path: System> Security> HTTPS.
<HTTPS> allows secure connections between the IP Camera and web browser using
<Secure Socket Layer (SSL)> or <Transport Layer Security (TLS)>, which ensure camera
settings or Username/ Password info from snooping. It is required to install a self-signed
certificate or a CA-signed certificate for implementing <HTTPS>.
To use HTTPS on the IP Camera, a HTTPS certificate must be installed. The HTTPS
certificate can be obtained by either creating and sending a certificate request to a
Certificate Authority (CA) or creating a self-signed HTTPS certificate, as described below.
Create Self-signed Certificate
Before a CA-issued certificate is obtained, users can create and install a self-signed
certificate first.
To Next Page
Loading...
