40
4.3.3.7 FTP
The FTP setting can be found under this path: System> FTP.
The Administrator can set as sending alarm message to a specific File Transfer Protocol
(FTP) site when event is triggered. Users can assign alarm message to up to two FTP sites.
Enter the FTP details, which include server, server port, user name, password and remote
folder, in the fields. Check the box “passive mode” to be connected with the FTP server by
passively receiving the FTP server’s IP address through a dynamic port. Alternatively,
uncheck the box to directly connect the FTP server via active mode.
Click on <Save> when finished.
To Next Page
Loading...
