39
4.3.3.6 Mail
The Mail setting can be found under this path: System> Mail.
The Administrator can send an e-mail via Simple Mail Transfer Protocol (SMTP) when event
is triggered. SMTP is a protocol for sending e-mail messages between servers. SMTP is a
relatively simple, text-based protocol, where one or more recipients of a message are
specified and the message text is transferred.
Two sets of SMTP can be configured. Each set includes SMTP Server, Server Port, Account
Name, Password and E-mail Address settings. Check the box "SMTP SSL" to send emails
via encrypted transmission. For SMTP server, contact your network service provider for
more specific information.
To Next Page
Loading...
