43
Up 10 Motion Detection Windows can be set. Click on the <add> button under the Live
Video Pane to add a Motion Detection Window. To cancel a Motion Detection Window, move
the mouse cursor to the selected Window, and click on the <delete> button.
If Motion Detection function is activated, the pop-off window (Motion) with indication of
motion will be shown.
When motion is detected, the signals will be displayed on the Motion window as shown
below.
Motion Detection
Users are able to turn on/off Motion Detection. Default setting is Off.
Motion Detection Setting
Users could adjust various parameters of Motion Detection in this section.
To Next Page
Loading...
