3.2 Administrator Installation and Setup
The Administrator Installation can be performed on Windows 98SE/ME/2000/XP with the same
user interface. Before the installation, please verify that your network protocol is installed on your
PC (TCP/IP, IPX and/or NetBEUI). It will be helpful in your installation process.
Insert the CD shipped along with the printer server into your CD-ROM drive. The Autorun.exe
program should be executed automatically. If not, run Autorun.exe manually from CD-ROM drive’s
root directory.
The “Installation Manager” will be displayed on the screen as following. Select “FPS-9021/9022”
Click “Administrator Utility”
16
To Next Page
Loading...
