3.4 Client Installation and Setup
The Client Installation can be performed on Windows 98SE/ME/2000/XP with the same user
interface. Before the installation procedure, please confirm that your PC has connected to the
network and installed at least one network protocol.
Insert the CD shipped along with the printer server into your CD-ROM drive. The Autorun.exe
program should be executed automatically. If not, run Autorun.exe manually from CD-ROM drive’s
root directory.
The "Installation Manager" will be displayed on the screen as follows. Select “FPS-9021/9022”.
Click “Client Utility”
24
To Next Page
Loading...
