7.1 Introduction
This chapter introduces printer server’s system configuration utility in Windows environment. This
utility is automatically installed during Windows Administrator Utility installation procedure - refer to
section 3.2 and 3.3.
This utility provides the most complete management and configuration functions on the printer
server side. This utility only provides configuration functions for printer server itself; it does not
include configuration functions for client side or other file server or NetWare server in the network
environment.
The Configuration Utility provides the following configuration and management functions:
Search Printer server: Search All Available Printer Servers on the Network.
Printer server Status: Display Printer server Network Status.
General Configuration: General Information of printer server.
TCP/IP Configuration: IP Address and DHCP Server Configuration.
NetWare Configuration: NetWare Printing Configuration.
AppleTalk Configuration: AppleTalk Protocol Setting.
SNMP Configuration: SNMP Information Configuration.
SMB: Configure the SMB Group Name.
System Configuration: Printer server Network Ability Setting and Firmware Upgrade.
Setup Wizard: Guide You Through All the Settings.
Report: List the Status of All Available Printer servers on the Network.
We will explain each function separately in the following section.
61
To Next Page
Loading...
