9.2 System Setup
9.2.1 Printer server Side
It is needless to do any setting on the printer server side. Make sure the printer server has correct
IP settings. If you want to share the printers to Internet users, you have to set a real IP to the
printer server. You also have to make sure that any gateway, router or firewall does not block IPP
protocol if you have these gateway devices installed in your network.
9.2.2 Client Side
You only need to perform Window’s standard Add New Printer procedure.
Step1. Click “Start”, choose “Settings” and select “Printers and Faxes”.
Step2. Click “Add a Printer”.
Step3. The “Add Printer Wizard” is displayed. Click “Next”.
104
To Next Page
Loading...
