7.11 System Configuration
Double Click “System” icon and the System configuration window will pop-up.
In the System configuration page, you can select to enable/disable each printing or management
protocol, upgrade the new firmware for this printer server, and load factory defaults to the printer
server.
Upgrade Firmware: You can use this “Upgrade Firmware” tool to update the newest firmware of
the printer server. Click “
” button and select the correct firmware in your PC. After selecting the
firmware file, click the “Upgrade” button to finish the firmware update process.
Load Default: If you want to reset the Printer server to default factory settings, please click “Load
Default”.
76
To Next Page
Loading...
