User Manual for BPS-i30
www.levitronix.com
PL-4042-00, Rev05, DCO# 21-057
Figure 24: Temperature for cooling with water cooling module WCM-30.2 @ 90°C liquid temp.
Note 1: Typical temperatures inside the driver for pumping with LPP-30.x pump heads and IPD-30 driver.
77
97
117
137
157
177
0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8
25
35
45
55
65
75
85
0 1 2 3 4 5 6 7
[°F]
[gallons / min]
[°C]
[liters/min]
Ambient Temp = 25°C
Liquid Temp. = 90°C
Specific gravity = 1g/cm3
Viscosity = 0.7cP
Temp. Time Constant = ~40min
Pump Head: LPP-30.1
Cooling with water cooling module WCM-30.2
and cooling liquid flow = 0.4 l/min at 20°C
temperature.
Recommended Operational Limit
15000 rpm
13000 rpm
10000 rpm
7000 rpm
5000 rpm
Absolute Thermal Limit
77
97
117
137
157
177
0.0 0.2 0.4 0.6 0.8 1.0
25
35
45
55
65
75
85
0 0.5 1 1.5 2 2.5 3 3.5 4
[°F]
[gallons / min]
[°C]
[liters / min]
Recommended Operational Limit
Ambient Temp = 25°C
Liquid Temp. = 90°C
Specific gravity = 1g/cm3
Viscosity = 0.7cP
Temp. Time Constant = ~40min
Pump Head: LPP-30.3
Cooling with water cooling module WCM-30.2
and cooling liquid flow = 0.4 l/min at 20°C
temperature.
19000 rpm
Absolute Thermal Limit
18000 rpm
16000 rpm
14000 rpm
12000 rpm
10000 rpm
5000 rpm
77
97
117
137
157
177
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5
25
35
45
55
65
75
85
0 2.5 5 7.5 10 12.5 15
[°F]
[gallons / min]
[°C]
[liters / min]
Recommended Operational Limit
Ambient Temp = 25°C
Liquid Temp. = 90°C
Specific gravity = 1g/cm3
Viscosity = 0.7cP
Temp. Time Constant = ~40min
Pump Head: LPP-30.6
Cooling with water cooling module WCM-30.2
and cooling liquid flow = 0.4 l/min at 20°C
temperature.
14000 rpm
Absolute Thermal Limit
5000 rpm
7000 rpm
13000 rpm 12000 rpm
11000 rpm
9000 rpm
To Next Page
Loading...
Need help?
General
