3-23
System Operation
-24 18 12 6 0 6 +12 ovld dB
L
R
-24 18 12 6 0 6 +12 ovld dB
L
R
-24 18 12 6 0 6 +12 ovld dB
L
R
-24 18 12 6 0 6 +12 ovld dB
L
R
Banks and Programs in Split Configurations
You must be running a “Split” Setup (101 or higher) in order to load any of the
Effects in Banks 11-16. As an example, press SETUP, then use the PREset
slider to locate Setup Preset 102 (REV / DLY). This is a Dual Mono setup with
different Effects running in each machine. Press PROG, then press BANK to
identify the Bank running in one of the Machines. Press MACH to display
Machine A. The display will show:
SPLIT REV 1
300MA: B13P3
Press MACH to display the Bank running in the other Machine (Machine B in this
example):
MOD DELAYS
300MB: B12P8
To see the Effect running in each Machine, press PROG, then press MACH
(without pressing BANK). Press MACH again to view the second Machine and
its Effect. To continue with the example above, press PROG . The display will
show:
LFO:FAZEDLYS
300MB: B12P8
Press MACH to display the Effect currently running in the other Machine
(Machine A in this example).
DRUMCHAMBER
300MA: B13P3
To Next Page
Loading...
