Lexicon
300L Owner's Manual
3-24
-24 18 12 6 0 6 +12 ovld dB
L
R
-24 18 12 6 0 6 +12 ovld dB
L
R
-24 18 12 6 0 6 +12 ovld dB
L
R
Now, suppose you want to load two entirely different effects into each machine.
For this example, we’ll load a mono shift effect from Bank 15 into Machine A and
a reverb effect from Bank 14 into Machine B.
Press BANK, then press 1, then press 5 (Bank 15). The display will show the
Mono Shift Bank:
MONO SHIFT
300MA: B15P1
Press PROG repeatedly to display the Vocal Shift Program:
VOCAL SHIFT
300MA: B15P6
Press 6 to load this Effect into Machine A.
Press MACH to select Machine B. Press BANK, then press 1, then press 4 (Bank
14). The display will show:
SPLIT REV 2
300MB: B14P1
Press PROG repeatedly to display “BIG BRICKS” (Program 4).Now, press 4 to
load BIG BRICKS into Machine B.
Note that, when running "split" setups, only Banks 11-16 and the programs
contained in them are displayed and made available.
To Next Page
Loading...
