Lexicon MPX 1 - REV 1 User Manual

LexiconMPX 1 User Guide
3-4
Meter Assign
Edit select:
> Compare
Press the > button. If the program has not been edited, the message Pgm is
unchanged will be displayed. If the program has been edited, the display will
change to show:
Use the < and > buttons to select and hear your edited version, or the original.
To exit, press Edit to return to the main Edit menu.
NOTE: If you exit with Original selected, you can view the original program
parameters, but cannot edit them. To continue editing, exit with Edited selected.
When shipped, the headroom display on the MPX 1 front panel is set to display
Input Level. In the Meter Assign menu, you can change the assignment for the
current program to have the display meters show any of the following:
Inputs
Outputs
Effect Input Level
Effect Output Level
Effect Input and Output Level
LFO 1&2
Envelopes 1&2
Footpedal
ADR 1&2
Simulation
The selection that you make here will take effect immediately and will be stored
with the program. Press Edit to exit to the main Edit menu.
The MPX 1 front panel meters default
to showing Input Level, but they can
be assigned to display other levels in
Edit mode.
Compare:
Edited Original

Lexicon MPX 1 - REV 1 Specifications

General

Brand	Lexicon
Model	MPX 1 - REV 1
Category	Recording Equipment
Language	English