Lexicon MPX 1 - REV 1 User Manual

LexiconMPX 1 User Guide
5-6
Setup Load and
Setup Store
A set of parameters from System mode, including audio parameters, Modes,
MIDI parameters and your current DataBase sorting method are collectively
called a "Setup". Five Setups can be stored in the unit, allowing you to quickly
reconfigure the MPX 1 at any time. The Setup Load and Setup Store controls
allow you to save your current configuration as Setup 1-5 and to reconfigure the
MPX 1 to any of these stored states.
When the MPX 1 is shipped (or when you reinitialize the unit) default values are
assigned to the Setup parameters. The following table shows these parameters
and the factory default setting of each.
Menu Parameter Default Setting
Program Database Sort by Number
System Audio Input/clck Analog/Int
Input Mode Stereo
Output Mode Analog
Dig In Lvl 0dB
ChanStatus Generate CS
Soft Sat Off
Modes Pgm Load Auto
Mix Mode Global
Bypass Mode Bypass
Master Bypass Src None
Pgm Mode Bypass
Tempo Mode Program
MemProtect Off
StorePrompt Off
Contrast 10
Sleep English Promo
MIDI Pgm Change On
Pgm# Offset 1
Receive 1
Transmit 1
Pgm Change On
Pgm+ Off
Pgm– Off
Ctl Send None
Ctl Smooth 100
MIDI Clock Off
Automation Off
Xmit ID 0
SysEx On
Receive ID 0
Xmit Speed Fast
Modes: Setup Load
< > (Press Store)
To load a Setup, select Setup Load from the System Modes menu.

Lexicon MPX 1 - REV 1 Specifications

General

Brand	Lexicon
Model	MPX 1 - REV 1
Category	Recording Equipment
Language	English