Lexicon MPX 1 - REV 1 User Manual

7-25
The Effects and Parameters
Mix 0-100% Dry/Wet ratio
Level Off, -89 to +6dB Amount of effect in the processed signal
Time 0-2000ms Delay time
1:24-24:1echo/beat
0-2260 ft, 0-688 M
(Time Units) Selects ms, note, feet, meters, or Tap ms
InMix 0-100% Ratio of input to feedback going into the delay
(Fbk insert) Pitch, Chorus, EQ, The left output of the selected source is scaled by Fbk
Mod, Reverb, Delay
Sense 0-100 Sensitivity of InMix to input amplitude
Pan 50L to C to 50R Output panner
Rls 0-100 Envelope release time constant
Atk 0-100 Envelope attack time constant
In the Looper effect InMix controls
the ratio of input to feedback into
the delay. This parameter is
ducked by the input level, so that
louder signals route the input sig-
nal into the delay, and softer sig-
nals route the feedback signal into
the delay. When Sense is at 0, no
ducking will occur. At 100 the input
will be ducked by even the lowest
input levels.
Mix 0-100% Dry/Wet ratio
Level Off, -89 to +6dB Amount of effect in the processed signal
Time 0 -2000ms Delay time
1:24-24:1echo/beat
0-2260 ft, 0-688 M
(Time Units) Selects ms, note, feet, meters, or Tap ms
Fbk -100 to +100% Feedback level
(Fbk insert) Pitch, Chorus, EQ, The left output of the selected source is scaled by Fbk
Mod, Reverb, Delay
Sense 0-100 Amount of ducking
Rls 0-100 Envelope release time constant
Similar to Looper, with the wet
output getting quieter as the input
gets louder. When Sense is at 0,
no ducking will occur. At 100 the
input will be ducked by even the
lowest input levels.
* = Interpolated; ( ) = Option of preceding parameter
Looper
Ducker
A/B Freeze Capture EQ
DuckedDelay

Lexicon MPX 1 - REV 1 Specifications

General

Brand	Lexicon
Model	MPX 1 - REV 1
Category	Recording Equipment
Language	English