3-3
Editing
The MPX 1 Edit Menus give you access to all of the controls you need to create
your own programs. Whether you want to reassign the front panel meter display,
re-route the effects in a program, or create an entirely new sound, you will find
the tools you need in this section.
The complete Edit mode menu structure is shown below, followed by detailed
explanations of each main menu selection.
The MPX 1 Edit Menus
Press Edit to enter the main Edit menu, and use the knob to select the particular
submenu you want (Compare, Meter Assign, etc.). Use the < and > buttons to
enter the submenu and select parameters, and the knob to adjust parameter
values. Press Edit again to return to the main Edit menu.
Compare
Whenever you edit an MPX 1 program, an edit indicator will appear in Program
mode, in front of the program name on the display to let you know that the
program has been changed since the last store operation.
In Program mode an edit indicator appears before the program name
if the program has been changed since the last store operation.
EQ programs
.Splitter AB
To hear the original version, press Edit to show the Edit select screen. Turn the
knob to display Compare.
To Next Page
Loading...
Need help?
General
