Jobs are printing out immediately
Try one or more of the following:
MAKE SURE PKI HELD JOBS IS INSTALLED AND RUNNING
1 From the Embedded Web Server, click Settings > Device Solutions > Solutions (eSF).
2 Verify that the PKI Held Jobs solution appears in the list of installed solutions and that it is in a “Running” state.
• If PKI Held Jobs is installed but is not running, then select the check box next to the application name, and
then click Start.
• If PKI Held Jobs does not appear in the list of installed solutions, then contact the Lexmark Solutions Help
Desk for assistance.
MAKE SURE ALL JOBS ARE REQUIRED TO BE HELD
1 From the Embedded Web Server, click Settings > Device Solutions > Solutions (eSF) > PKI Held Jobs >
Configure.
2 Under Advanced Settings, select the Require All Jobs to be Held and Clear Print Data check boxes.
3 Click Apply.
43
To Next Page
Loading...
Need help?
General