38
7
Customize the scan settings. For more information, see
“Customizing a scan job” on page 38.
8 Click Scan Now to complete the scan.
Customizing a scan job
1 Open the All-In-One Center. For more information, see “Using the
Lexmark All-In-One Center” on page 15.
2 From the Scanning & Copying tab, click See More Scan Settings.
3 From the What is being scanned? area, select an option.
4 From the “Select Scan Quality” drop-down menu, select an option.
5 Click Display Advanced Scan Settings to change advanced
options.
6 Click the tabs to make changes as needed. For a description of the
tabs, see “Advanced Scan Settings” on page 39.
7 When you are finished customizing the scan settings, click OK to
save.
8 To scan, click Scan Now.
To Next Page
Loading...
