58
Wiping the print cartridge nozzles and contacts
1
Remove the print cartridge. For more information, see “Removing a
used cartridge” on page 52.
2 Dampen a clean, lint-free cloth with water.
3 Gently hold the cloth against the nozzles for about three seconds,
and then wipe in the direction shown.
4 Using another clean section of the cloth, gently hold the cloth
against the contacts for about three seconds, and then wipe in the
direction shown.
5 With another clean section of the cloth, repeat steps 3 through 4.
6 Let the nozzles and contacts dry completely.
7 Reinsert the print cartridge. For more information, see “Installing
the print cartridge” on page 54.
8 Print the document again.
To Next Page
Loading...
