Lexmark 2300 Series - Page 68

68
Checking the All-In-One status
Check the All-In-One status to make sure a document is not being held or
paused and that the All-In-One is set as the default printer. To check the
status:
1 Click Start Æ Settings Æ Printers and Faxes or Printers.
or
Click Start Æ Control Panel Æ Printers and Other Hardware Æ
Printers and Faxes.
2 Double-click the Lexmark 2300 Series icon.
3 Click Printer, and make sure no check mark appears next to Pause
Printing.
4 Make sure a check mark does appear next to Set As Default.