Repair information 4-45
5025-2xx, 4xx
15. Remove the spring (G) from the left lower frame FRU.
16. Swing the rear of the lower frame away from the printer, and remove.
Main drive gear assembly removal
See “Main drive gear assembly, with motors” on page 7-5 for the part number.
1. Remove the left cover. See “Left cover assembly removal” on page 4-6.
2. Remove the LVPS. See “Low-voltage power supply (LVPS) assembly removal” on page 4-37.
3. Remove the screw (A) on the top cover.
To Next Page
Loading...
