2-6 Service Manual
5025-2xx, 4xx
Load Manual
<custom string>
Printer does not detect media meeting the description <custom string> in the single
sheet feeder (manual feeder).
The following actions can be taken:
• Load paper, press Select ( ), and the job continues.
•Press Select ( ) to override the source, and an alternate source for media is
selected.
•Press Stop ( ), and then press Select ( ) to cancel printing.
Load Manual
<custom type>
Printer does not detect media meeting the description <custom type> in the single
sheet feeder (manual feeder).
The following actions can be taken:
• Load paper and the job continues.
•Press Select ( ), and choose an alternate source for media.
•Press Stop ( ), and then press Select ( ) to cancel printing.
Load Manual
<size>
Printer does not detect media meeting the description <size> in the single sheet
feeder (manual feeder).
The following actions can be taken:
• Load paper and the job continues.
•Press Select ( ), and choose an alternate source for media.
•Press Stop ( ), and then press Select ( ) to cancel printing.
Load Manual
<type> <size>
Printer does not detect media meeting the description <type> and <size> in the single
sheet feeder (manual feeder).
The following actions can be taken:
• Load paper and the job continues.
•Press Select ( ), and choose an alternate source for media.
•Press Stop ( ), and then press Select ( ) to cancel printing.
PJL ST Message Try one or more of the following:
•Press Select ( ) to clear the message, and continue printing.
• Wait for the message to clear.
Programming Code The printer is receiving a file that is a code update. Do not power off. Wait for the
message to clear to continue printing.
Programming Flash Fonts and macros are being written to flash. Do not power off. Wait for the message
to clear to continue printing.
Replace <color>
Cartridge
Replace the toner cartridge of the indicated color. The printer continues after the
toner door is closed.
Remote Management
Active
The printer is offline while it configures settings. Do not power off. Wait for the
message to clear to continue printing.
Remove Paper
Standard Bin
The standard output bin is full or nearly full. Remove the media from the bin.
Remove Packaging
Material
Packaging material is detected by the printer. Remove the packaging material, and
press Select ( ). If all the packaging material is removed, then the printer resumes.
Std Bin Full Empty the standard exit bin to clear the message and continue printing.
Toner Low Try one or more of the following:
•Press Select ( ) to clear the message, and continue printing.
• Replace the indicated toner cartridge, and then close the toner door.
Tray <x> Empty Load the paper tray or other source with the correct paper type and size.
Tray <x> Low Load the paper tray or other source with the correct paper type and size.
Tray <x> Missing Insert the specified tray into the printer.
Unplug and Change
Mode
Camera is not in a proper mode to use the PictBridge feature. Unplug the camera
cable to the printer, and change the camera mode.
User primary
message
Explanation
To Next Page
Loading...
