General information 1-15
5026
Storing paper
Use these paper storage guidelines to help avoid jams and uneven print quality:
• For best results, store paper where the temperature is 21°C (70°F) and the relative humidity is 40%. Most
label manufacturers recommend printing in a temperature range of 18 to 24°C (65 to 75°F) with relative
humidity between 40 and 60%.
• Store paper in cartons when possible, on a pallet or shelf, rather than on the floor.
• Store individual packages on a flat surface.
• Do not store anything on top of individual paper packages.
Tools required for service
Flat-blade screwdrivers, various sizes
#1 Phillips screwdriver, magnetic
#2 Phillips screwdriver, magnetic
#2 Phillips screwdriver, magnetic short-blade
7/32 inch (5.5 mm) open-end wrench
7.0 mm nut driver
Needlenose pliers
Diagonal side cutters
Spring hook
Feeler gauges
Analog or digital multimeter
Parallel wrap plug 1319128
Twinax/serial debug cable 1381963
Coax/serial debug cable 1381964
Flash light (optional)
Acronyms
Delete any unused terms and add any terms that appear in your book.
BLDC Brushless DC Motor
BUR Back Up Roll
CCyan
COD Color On Demand
DIMM Dual Inline Memory Module
DRAM Dynamic Random Access Memory
EP Electrophotographic Process
ESD Electrostatic Discharge
FRU Field Replaceable Unit
GB Gigabyte
HCIT High-Capacity Input Tray
HVPS High Voltage Power Supply
KBlack
LASER Light Amplification by Stimulated Emission of Radiation
LCD Liquid Crystal Display
LED Light-Emitting Diode
LVPS Low-Voltage Power Supply
M Magenta
MPF Multipurpose Feeder
To Next Page
Loading...
