Lexmark C910 User Manual (English)

Other manuals for Lexmark C910

Instructions50 pages

Manual11 pages

Service Manual474 pages

Setup Guide92 pages

Reference Guide475 pages

Questions and Answers:

M
Michael NortonAug 21, 2025
Why are there colored lines on my Lexmark C910 Printer's prints?
- R
  Rachel RiveraAug 21, 2025
  If colored lines, streaks, or smudges appear on the printed page, or the print appears blurred or unclear when using your Lexmark Printer, replace the photodevelopers. If the problem only occurs when printing black, replace just the black photodeveloper and fuser coating roll. If the problem occurs when printing one of the colors, replace all three of the color photodevelopers.
J
joshua58Aug 23, 2025
What to do if my Lexmark C910 Printer is printing blank pages?
- M
  melissabeasleyAug 23, 2025
  If the page from your Lexmark Printer is blank, make sure the affected print unit is completely installed in the printer. If the problem persists, replace the affected toner cartridge.
T
Timothy GarciaAug 25, 2025
How to fix light lines on printouts from Lexmark C910 Printer?
- A
  Amber CrossAug 25, 2025
  If light lines or streaks appear on the printed page from your Lexmark Printer, try cleaning the LEDs. Also, make sure the affected photodeveloper is completely installed in the printer. Remove the affected toner cartridge and gently shake it back and forth to distribute the toner evenly, then reinsert it. If the problem continues, replace the affected toner cartridge or the photodevelopers. If the problem only occurs when printing black, replace just the black photodeveloper. If the problem occurs when printing one of the colors, replace all three of the color photodevelopers and the transfer belt.
M
Margaret FosterAug 27, 2025
Why is toner sticking to the back of pages from my Lexmark Printer?
- J
  Jesse HooperAug 27, 2025
  If toner adheres to the back of the page when using your Lexmark Printer, remove the fuser oil roll and wipe it with a dry, lint-free cloth, and clean the transfer belt.
J
Jason CowanAug 27, 2025
How to resolve periodic dirt on printouts from Lexmark C910 Printer?
- W
  William MartinAug 27, 2025
  If you notice periodic dirt on pages printed from your Lexmark Printer, check for dirt or damage to the fuser hot, the fuser press roll, or the fuser oil roll OCR backup. Also, check for scratches on the surface and replace if necessary. Be sure the transfer belt is clean and not damaged and replace parts as necessary.
J
James GarciaAug 29, 2025
Why are colors missing when I print with my Lexmark C910?
- S
  Sherry WallaceAug 29, 2025
  If your Lexmark Printer is missing colors, ensure the toner cartridge and the PC drum unit are properly seated, and that the contacts on the print unit are clean. Also, be sure the print unit is installed in the correct position. Run a print test. If the issue continues, switch the toner cartridge with another color and run a test print. If the new color prints, replace the failing toner cartridge. If the problem persists, check the connector on the high voltage unit. Replace the high voltage unit if the problem remains. If the problem remains, replace the printhead and EPROM. If the problem remains, replace the printhead controller board. If the problem remains, replace the high voltage unit. If the problem remains, replace the transfer belt unit.
G
gibsonlanceAug 31, 2025
Why is my Lexmark C910 Printer printing a page with 100% color coverage?
- B
  brian97Aug 31, 2025
  If the page from your Lexmark Printer has 100% coverage of one color, be sure the affected photodevelopers are completely installed in the printer. If the issue persists, replace the photodevelopers. If the page is black, replace just the black photodeveloper. If the page is another color, replace all three of the color photodevelopers.
K
Kevin GraySep 1, 2025
How to fix skewed print on my Lexmark Printer?
- B
  Benjamin RojasSep 1, 2025
  If the print on the page is skewed from your Lexmark Printer, be sure the width guides in the paper tray or the multipurpose feeder fit snugly against the media you loaded. Also, ensure the paper you load fits under the two corner tabs at the front of the tray and that the charge roll or belt is seated properly.
R
Rachel MaySep 3, 2025
Why is toner coloring the background of pages from my Lexmark C910 Printer?
- D
  David MillerSep 3, 2025
  If toner colors the background of the page from your Lexmark Printer, be sure the affected photodevelopers and toner cartridges are completely installed in the printer.
C
Chad HuntSep 4, 2025
How do I troubleshoot the LED Printhead on a Lexmark C910 Printer?
- J
  Joseph WalkerSep 4, 2025
  If you are experiencing issues with the LED Printhead on your Lexmark Printer, be sure the LED printhead cable is securely connected to the printhead controller board and LED printhead assembly. If the problem remains, replace the LED printhead.