Lexmark C910 - Too Many Flash Options; Too Many Trays Attached

224
58 Too Many
Flash Options
What this message means:
Too many flash memory options are installed.
What you can do:
Turn off and unplug the printer. Remove the excess flash memory. Plug in the printer and turn
it on.
Note: To prevent an electrical overload, plug your printer into a well-grounded outlet on a
non-ground fault interrupter (GFI) circuit.
See also:
Removing memory and network options
58 Too Many
Trays Attached
What this message means:
Too many drawers with matching trays are installed.
What you can do:
Turn off and unplug the printer. Remove the additional drawers. Plug in the printer and turn it
on.
Note: To prevent an electrical overload, plug your printer into a well-grounded outlet on a
non-ground fault interrupter (GFI) circuit.
See also:
Setup Guide