Lexmark C910 - Engine Code Crc Failure; Fuser Exhausted; Fuser Life Warning

228
80 Fuser
Exhausted
What this message means:
The fuser has reached its end of life.
What you can do:
•
Replace the fuser.
See also:
Replacing the fuser
80 Fuser
Life Warning
What this message means:
The fuser is nearing its end of life. If you do not have a fuser on hand, order one now. You can
print approximately 500 pages before the 80 Fuser Exhausted message appears.
What you can do:
Press Go to clear the message and continue printing. The Supplies message is displayed
until you replace the fuser.
See also:
Replacing the fuser
81 Engine Code
CRC Failure
What this message means:
Microcode in the engine flash code module has failed a system check.
What you can do:
Press Go to clear the message and discard the code. Retransmit the microcode data from the
host computer.