304
Format Flash
Purpose:
To format the flash memory.
Values:
W
ARNING: Do not turn off the printer while the flash is formatting.
Hex Trace
Purpose:
To help isolate the source of a print job problem. With Hex Trace selected, all data sent to the printer is
printed in hexadecimal and character representation. Control codes are not executed.
To exit Hex Trace, turn the printer off or reset the printer from the Job Menu.
Job Acct Stat
Purpose:
To print a listing of all job statistics stored on the hard disk, or to clear all statistics on the disk.
Values:
See also:
Job Accounting, Job Acct Limit
Yes Deletes any data stored in flash memory and prepares the flash memory to receive new
resources.
No Cancels the request to format the flash memory and leaves current resources stored in flash
memory.
Print Prints all statistics available for the most recent print jobs.
Clear Deletes all accumulated job statistics from the hard disk.
To Next Page
Loading...
Need help?
General
